Guarantee for Three Circles of each Inner or Outer Section
Stainless Steel Cold Rolled Coil
Zhonghengxin is a leading stainless steel coil supplier, offering the best price and service. We can process orders to any specification, length, and thickness, and then do quality inspection and packaging.
Product Specification and Size :
Product Specification and Steel Grade
ASTM | JIS | AISI | EN | Mill’s Standard | |
---|---|---|---|---|---|
Grade | S30100 S30400 S30403 S31008 S31603 S32100 S41008 S43000 S43932 S44400 S44500 |
SUS301 SUS304 – SUS310S – SUS321 SUS410S SUS430 – SUS444 SUS430J1L |
301 304 304L 310S 316L 321 410S 430 – 444 – |
1.4310 1.4301 1.4307 1.4845 1.4404 1.4541 – 1.4016 1.4510 1.4521 – |
201 202 204Cu3 |
Other specifications are also available up to request
Available Size
Width | Thickness | Inner Diameter | Available Steel Grade | Surface Finish |
---|---|---|---|---|
610~1524 mm | 0.3~3.0 mm | 610 or 508 +0/-5 mm | 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 | 2B, 2D, BA, No.3, No.4, No.5, SB, HL |
Dimension and Shape Tolerance (For Reference)
Thickness (mm) | 630 ≤ Width < 1000 (mm) | 1000 ≤ Width < 1250 (mm) | 1250 ≤ Width < 1550 (mm) |
---|---|---|---|
0.25 ≤ T < 0.40 | ±0.030 | ±0.035 | – |
0.40 ≤ T < 0.60 | ±0.035 | ±0.035 | – |
0.60 ≤ T < 0.80 | ±0.040 | ±0.040 | – |
0.80 ≤ T < 1.00 | ±0.040 | ±0.050 | ±0.050 |
1.00 ≤ T < 1.25 | ±0.050 | ±0.055 | ±0.060 |
1.25 ≤ T < 1.60 | ±0.055 | ±0.060 | ±0.060 |
1.60 ≤ T < 2.00 | ±0.065 | ±0.070 | ±0.080 |
Mill Edge | Cut Edge |
---|---|
Aim ±10 | Aim -0 / +1 |
Width Tolerance |
Surface Finish | Mill Edge | Cut Edge |
---|---|---|
2B / BA | 10 mm | 5 mm |
2D | 20 mm | 10 mm |
Chemical Composition & Mechanical Property :
Chemical Composition (For Reference)
JIS Specification | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Spec. JIS G4304 G4305 G4312 |
P% Max. | S% Max. | Mo% Max. | Ti% Max. | Other | Mn% Max. | P% Max. | S% Max. | Mo% Max. | Ti% Max. | Other |
SUS301 | 6.0~8.0 | 16.0~18.0 | 0.15 | 1 | 2 | 0.045 | 0.03 | – | – | – | |
SUS304 | 8.0~10.5 | 18.0~20.0 | 0.08 | 1 | 2 | 0.045 | 0.03 | – | – | – | |
SUS304L | 9.0~13.0 | 18.0~20.0 | 0.03 | 1 | 2 | 0.045 | 0.03 | – | – | – | |
SUS310S | 19.0~22.0 | 24.0~26.0 | 0.08 | 1.5 | 2 | 0.045 | 0.03 | – | – | – | |
SUS316L | 12.0~15.0 | 16.0~18.0 | 0.03 | 1 | 2 | 0.045 | 0.03 | 2.0~3.0 | – | – | |
SUS321 | 9.0~13.0 | 17.0~19.0 | 0.08 | 1 | 2 | 0.045 | 0.03 | – | 5xC MIN. | – | |
SUH409L | 0.60 | 10.5~11.75 | 0.03 | 1 | 1 | 0.04 | 0.03 | – | 6xC~0.75 | – | |
SUS410S | 0.60 | 11.5~13.5 | 0.08 | 1 | 1 | 0.04 | 0.03 | – | – | – | |
SUS420J2 | 0.60 | 12.0~14.0 | 0.26-0.40 | 1 | 1 | 0.04 | 0.03 | – | – | – | |
SUS430 | 0.60 | 16.0~18.0 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | – | – | – |
JIS Specification | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Spec. ASTM A240 |
teel Grade | Ni% Max. | Cr% Max. | C% Max. | Si% Max. | Mn% Max. | P% Max. | S% Max. | Mo% Max. | Ti% Max. | Other |
S30100 | 6.0~8.0 | 16.0~18.0 | 0.15 | 1 | 2 | 0.045 | 0.03 | – | – | N: 0.1 Max. | |
S30400 | 8.0~10.5 | 17.5~19.5 | 0.07 | 0.75 | 2 | 0.045 | 0.03 | – | – | N: 0.1 Max. | |
S30403 | 8.0~12.0 | 17.5~19.5 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | – | – | N: 0.1 Max. | |
S31008 | 19.0~22.0 | 24.0~26.0 | 0.08 | 1.5 | 2 | 0.045 | 0.03 | – | – | – | |
S31603 | 10.0~14.0 | 16.0~18.0 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 2.0~3.0 | – | N: 0.1 Max. | |
S32100 | 9.0~12.0 | 17.0~19.0 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | – | 5(C+N)~0.7 | N: 0.1 Max. | |
S41000 | 0.75 | 11.5~13.5 | 0.08~0.15 | 1 | 1 | 0.04 | 0.03 | – | – | – | |
S43000 | 0.75 | 16.0~18.0 | 0.12 | 1 | 1 | 0.04 | 0.03 | – | – | – | |
S43932 | 0.5 | 17.0~19.0 | 0.03 | 1 | 1 | 0.04 | 0.03 | – | – | N:0.03Max. Al:0.15Max. Nb+Ti = [ 0.20 + 4 ( C + N ) ] ~ 0.75 |
|
SUS430 | 0.60 | 16.0~18.0 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | – | – | – |
Mechanical Property (For Reference)
JIS Specification | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Spec. JIS G4304 G4305 G4312 |
Steel Grade | N/mm 2 MIN. Tensile Stress |
N/mm 2 MIN. Proof Stress |
% MIN Elongation |
HRB MAX. Hardness |
Bendability: Bending Angle |
Bendability: Inside Radius |
S% Max. | Mo% Max. | Ti% Max. | Other |
SUS301 | 520 | 205 | 40 | 95 | No Require | – | 0.03 | – | – | – | |
SUS304 | 520 | 205 | 40 | 90 | No Require | – | 0.03 | – | – | – | |
SUS304L | 480 | 175 | 40 | 90 | No Require | – | 0.03 | – | – | – | |
SUS310S | 520 | 205 | 40 | 90 | No Require | – | 0.03 | – | – | – | |
SUS316L | 480 | 175 | 40 | 90 | No Require | – | 0.03 | 2.0~3.0 | – | – | |
SUS321 | 520 | 205 | 40 | 90 | No Require | – | 0.03 | – | 5xC MIN. | – | |
SUH409L | 360 | 175 | 25 | 80 | 180° | 0.5 t (t<8 mm), 1.0 t (t>8 mm) |
0.03 | – | 6xC~0.75 | – | |
SUS410S | 410 | 205 | 20 | 88 | 180° | 1.0 time the thickness | 0.03 | – | – | – | |
SUS420J2 | 540 | 225 | 18 | 99 | No Require | – | 0.03 | – | – | – | |
SUS430 | 420 | 205 | 22 | 88 | 180° | 1.0 time the thickness | 0.03 | – | – | – |
ASTM Specification | ||||||||
---|---|---|---|---|---|---|---|---|
Spec. ASTM A240 |
Steel Grade | N/mm 2 MIN. Tensile Stress |
N/mm 2 MIN. Proof Stress |
% MIN. Elongation |
HRB MAX. Hardness |
HBW MAX. Hardness |
Bendability: Bending Angle |
Bendability: Inside Radius |
S30100 | 515 | 205 | 40 | 95 | 217 | No Require | – | |
S30400 | 515 | 205 | 40 | 92 | 201 | No Require | – | |
S30403 | 485 | 170 | 40 | 92 | 201 | No Require | – | |
S31008 | 515 | 205 | 40 | 95 | 217 | No Require | – | |
S31603 | 485 | 170 | 40 | 95 | 217 | No Require | – | |
S32100 | 515 | 205 | 40 | 95 | 217 | No Require | – | |
S41000 | 450 | 205 | 20 | 96 | 217 | 180° | – | |
S43000 | 450 | 205 | 22A | 89 | 183 | 180° | – | |
S43932 | 415 | 205 | 22 | 89 | 183 | 180° | – |